About Large Format Printer
Large Format Printer works from Centurion with a practical range of wide-format printers, consumables and print-room support. We supply sign shops, photo labs and print studios across Gauteng and deliver equipment, inks and media to every province.
What moves through our showroom
Our work centres on wide-format print production. We supply eco-solvent, aqueous and UV printers, then back them up with the parts and consumables that keep output stable on real shop floors. That includes printheads, bulk inks, media, RIP software, maintenance items and the day-to-day spares that are awkward to source when a machine is standing still.
The range is aimed at print businesses that need consistent colour, predictable media feed and serviceable hardware rather than novelty kit. We do not sell plasma equipment, routers or lasers. The focus stays on print, colour control and the running items a studio needs every week.
- Wide-format printers for eco-solvent, aqueous and UV production
- Printheads, capping parts, dampers, pumps and related spares
- Bulk inks, cartridges, cleaning fluids and maintenance consumables
- Printable media for indoor display, signage, photo and general roll work
- RIP software, set-up, colour profiling and operator training
The clients we work with most often
Most enquiries come from sign shops, photo labs and print studios that already know the pressures of missed colour, blocked nozzles and poor media handling. Some are fitting out a first production room. Others are replacing an older printer that no longer holds registration or has become too expensive to keep alive. In both cases the discussion usually starts with the work they print every day, the media widths they need and the finish their customers expect.
Because we are based in Centurion, a fair share of site work falls around Pretoria, Midrand, Johannesburg and the East Rand. Printers, inks and media also move out to the Cape, KwaZulu-Natal, the Free State, Mpumalanga, Limpopo, North West and the Northern Cape. Gauteng jobs often include on-site set-up and profiling, while out-of-town orders are planned around delivery access, unpacking space and the machine footprint.
- Sign production for decals, banners, vinyl graphics and display work
- Photo output where tone, skin colour and paper choice matter
- Studio printing for proofing, short runs and specialist media
- Shops replacing ageing hardware with a more suitable print process
How the team handles the technical side
Jobs are shared by role rather than handed around loosely. The sales side deals with machine selection, media width, ink set, workflow fit and the accessories that need to be in the room from day one. The technical side handles installation planning, printhead checks, initial calibration and the service items that tend to show up after the machine has started producing. Colour work is handled methodically, with checked screens and controlled profiling.
Training is part of the handover, especially where a studio is moving from one ink chemistry to another or adding a different print process to an existing room. Operators need clear daily care routines, media loading practice, nozzle check habits, cleaning limits and a sound understanding of when a small issue is turning into a costly one. It sounds basic but these details save stock and time.
Our Centurion base and what it is for
From Centurion we run a working showroom and office space used for product discussions, machine viewing, accessory matching and job planning. The showroom supports stock supply, print-method comparisons, floor-space planning and printer matching for the sorts of rolls clients already buy. Those conversations are easier when the machine class, the take-up arrangement and the likely service clearances are spoken through properly.
The premises also support pre-delivery checks and the practical prep that goes with a machine order. That can include confirming the right consumables, arranging the software side, planning delivery access and noting conditions that affect print hardware in this part of the country. Highveld dust, dry air and long production days can be hard on printheads if maintenance slips, so those points are dealt with early, before trouble starts.
From first enquiry to installation day
Most work starts through our contact form with a brief outline of the print work involved. The useful details are usually the intended application, media width, expected monthly volume, the ink type under consideration and whether the site already has a RIP workflow in place. From there the team can guide the discussion toward the printer class, the supporting items and the practical limits of each process.
Once a machine and accessory list are settled, the job moves into delivery and set-up planning. That stage covers floor access, unpacking, machine position, consumables, software installation and the first calibration work. After installation the operator is taken through routine cleaning, nozzle checks, media handling and profile use so the printer leaves the first week in a usable state rather than as a half-configured piece of equipment.
- Initial enquiry and application review
- Printer, ink and media matching
- RIP and workflow planning
- Delivery, installation and first calibration
- Operator handover with daily care instruction
Aftercare that suits a production room
After a printer is in place, support usually shifts to consumables, printhead health, colour consistency and the small service parts that affect uptime. A studio may need fresh profiles for a different media line, replacement items after wear, or guidance when output drifts from a known standard. The aim is a workable print room with clear technical guidance while rolls, media settings and machine time are managed properly.
Some clients need regular ink and media supply, others mainly need spares on hand and technical input when a problem shows up. Either way, the approach stays grounded in the machine, the substrate and the print result on the day. If you are comparing eco-solvent, aqueous or UV for a new application, or trying to steady an existing workflow that has gone off colour a bit, our contact form is the place to start.
Questions we get asked
Do you only sell printers?
Printers are one part of the range. We also supply printheads, inks, media, RIP software, spares, set-up, colour profiling and print-shop training.
Which print businesses do you work with?
Most of our work is with sign shops, photo labs and print studios, from smaller production rooms to established operations adding or replacing wide-format equipment.
Do you handle delivery outside Gauteng?
We are based in Centurion and supply Gauteng directly, with printer, ink and media deliveries arranged for every province.
Also worth a look
Tell us about the job
Send sizes, materials and where you are through our contact form, and we will come back with the practical options.
Open the contact form