Large Format Printer

Wide-format printers

Wide-format printing works best when the printer matches the ink set, the media, and the place the finished job will hang. Our range covers eco-solvent, aqueous and UV machines for sign shops, photo labs and print studios across South Africa.

Three printer families, three different jobs

Not every wide-format printer suits every shop. Some jobs need outdoor durability on self-adhesive vinyl, some need clean photographic tones on coated papers, and some need direct printing onto rigid boards or unusual surfaces. That is why the range is split into eco-solvent, aqueous and UV machines.

From our Centurion base we help print rooms compare output type, media width, drying behaviour, colour expectations and floor space before a machine is chosen. The right machine is the one that suits the work you actually run most weeks.

Eco-solvent printers for decals, banners, posters and general sign work.
Aqueous printers for photo output, proofing, fine detail and indoor display work.
UV printers for rigid media, speciality items and prints that need instant curing.

How to decide between eco-solvent, aqueous and UV

A good starting point is to look at where the print ends up. If the finished piece is heading to a shopfront, vehicle panel, pavement sign or outdoor promo frame, eco-solvent often makes sense. If the work is photographic, exhibition quality, or colour-critical for indoor viewing, aqueous can be the better fit. UV steps in when the job needs to print onto boards, plastics or other non-porous materials without long drying waits.

Production rhythm matters too. A small studio doing short runs on premium media may value detail and tonal smoothness over raw volume. A busy sign room might need a machine that handles long banner runs with steady ink delivery and practical daily maintenance. UV systems add flexibility, but they also need a proper look at substrate range, handling method and the kind of finishing your team already does.

Choose eco-solvent when outdoor graphics are a regular part of the workload.
Choose aqueous when image quality and fine gradation matter most.
Choose UV when direct-to-surface work or rigid board output is part of the brief.
Compare total running needs, including print speed, media handling, finishing and display conditions.

Media, finish and where the print will hang

Media choice often decides the printer before anything else. Eco-solvent machines are commonly paired with self-adhesive vinyl, PVC banner, one-way vision and coated poster stocks. Aqueous models are usually chosen for photo papers, film, canvas and proofing media. UV machines open the door to boards, synthetic stocks and certain speciality surfaces that would not suit water-based or solvent-led workflows.

South African conditions matter here. Inland dust around Gauteng can affect media storage and head care, while coastal humidty can change how some materials feed and lie flat. A printer that looks fine on paper still needs to behave properly in a real print room with opened media rolls, changing temperatures and normal operator handling. We help customers line up the printer with the media they already buy, or with a better fit where the current stock is fighting the machine.

Points that matter on a working print floor

The decision includes daily maintenance routines, head cleaning, ink changeovers, RIP setup and colour control. Many shops benefit from a machine the team on shift can run consistently and maintain properly.

Print width and usable floor space around the machine.
Ink configuration and whether colour set-up suits your common jobs.
Printhead availability, service parts and routine cleaning items.
Media take-up, feed stability and handling on longer runs.
RIP software workflow, nesting, profiling and repeatable colour output.
Training needs for operators moving from one ink technology to another.

These practical details save a lot of frustration later. Colour drift shows up fast on greys and skin tones, and poor media tracking wastes metres very quickly.

Set-up, profiling and operator training

Printer performance depends heavily on installation and calibration. Weak results can come from incorrect media presets, poor RIP configuration, or colour profiles that do not suit the actual ink and substrate in use. We supply printers together with set-up, colour profiling and print-shop training so the machine lands in production with useful settings rather than guesswork.

This support is especially important where a shop is adding a new print category. A sign studio moving into photo work, or a photo lab taking on display graphics, often needs operator training alongside the hardware handover. The operator needs to understand resolution choices, pass modes, drying or curing behaviour, and how to keep output consistent from one roll to the next.

What sits outside this range

Wide-format printers sit at the centre of this range. We sell and support printers, inks, printheads, media, RIP software, accessories and spares linked to that print workflow. We do not sell plasma equipment, routers or lasers, so the advice stays focused on ink-based wide-format production.

Printer choice starts with the type of work you run most often. Eco-solvent suits a large share of sign output, aqueous suits photographic and colour-sensitive jobs, and UV suits direct printing onto a wider mix of surfaces. For machine selection, media compatibility and print-room planning, send the details through our contact form.

Explore the range

Eco-solvent printers

Outdoor print platforms for vinyl, banner and wrap work, supplied with inks, profiling and shop-floor setup support.

Aqueous printers

Aqueous printers for photo, proofing and fine-art output where clean colour and smooth tonal range matter most.

UV printers

Roll and flatbed UV printers for boards, décor panels, labels and short-run packaging with practical site guidance.

Printer accessories

Take-up reels, heaters, stands and dryers matched to real print widths, media and daily production loads.

Questions we get asked

Which printer type is best for outdoor signage?

For many outdoor sign applications, eco-solvent is the usual starting point because it works well on common sign media such as vinyl and banner stock. Final suitability still depends on the media, expected lifespan and finishing method.

Can I use one printer for photos, decals and rigid boards?

A single machine can cover some overlap, but no one printer is ideal for every category. Photo output, outdoor decals and rigid board printing each place different demands on ink type, media handling and image quality.

Do you help with installation and colour setup?

We provide set-up, colour profiling and print-shop training so the printer, RIP workflow and media settings are aligned for the work your team needs to produce.

Tell us about the job

Send sizes, materials and where you are through our contact form, and we will come back with the practical options.

Open the contact form